 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MUR210 Preferred Device SWITCHMODETM Power Rectifier . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: * * * * * Ultrafast 20 Nanosecond Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction http://onsemi.com Mechanical Characteristics ULTRAFAST RECTIFIERS 2 AMPERES 100 VOLTS * Case: Epoxy, Molded * Weight: 0.4 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Lead and Mounting Surface Temperature for Soldering Purposes: * * * * 220C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a "RL'' suffix to the part number Polarity: Cathode Indicated by Polarity Band Marking: MUR210 PLASTIC AXIAL LEAD CASE 059 Leads are Readily Solderable MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Square Wave Mounting Method #3 Per Note 1.) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) Value 100 -- 2.0 @ TA = 100C 35 Unit Volts MARKING DIAGRAM MUR210 MUR210 = Device Code Amps IFSM Amps ORDERING INFORMATION -65 to +175 C Device MUR210 MUR210RL Package Axial Lead Axial Lead Shipping 1000 Units/Bag 5000/Tape & Reel TJ, Tstg 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2000 1 September, 2000 - Rev. 0 Publication Order Number: MUR210/D MUR210 THERMAL CHARACTERISTICS Characteristic Maximum Thermal Resistance, Junction to Ambient Symbol RJA Value See Note 3. Unit C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2.) (IF = 2.0 Amp, TJ = 150C) (IF = 2.0 Amp, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2.) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/s) (IF = 0.5 Amp, IR = 1.0 Amp, IREC = 0.25 A) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/s, IREC to 1.0 V) 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. 10 10 VF 0.74 0.94 iR 50 2.0 trr 30 20 tfr 20 ns ns A Volts IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1 VF @ 175C VF @ 25C IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1 VF @ 175C VF @ 25C VF @ 100C VF @ 100C 0.1 0.3 0.5 0.7 0.9 1.1 1.3 0.1 0.3 0.5 0.7 0.9 1.1 1.3 VF, INSTANTANEOUS VOLTAGE (VOLTS) VF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 2 MUR210 1000 IR, REVERSE CURRENT (A) Ir @ 175C Ir @ 100C 10 Ir @ 25C 1 100.000 IR, REVERSE CURRENT (A) Ir @ 175C 10.000 100 1.000 Ir @ 100C 0.100 Ir @ 25C 0.010 0.1 0.001 0 25 50 75 100 0 25 50 75 100 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Maximum Reverse Current 5 IF(AV), AVERAGE FORWARD 2.5 Figure 4. Typical Reverse Current 4 dc 3 TJ = 175C PF(AV), AVERAGE POWER DISSIPATION (WATTS) 2.0 TJ = 175C 1.5 Square Wave 1.0 dc 2 Square Wave 1 0.5 0 0 50 100 150 200 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT Figure 5. Current Derating Figure 6. Power Dissipation 50 TJ = 25C C, CAPACITANCE (pF) C, CAPACITANCE (pF) 40 50 TJ = 25C 40 30 30 20 20 10 10 0 0 10 20 30 40 50 0 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 7. Maximum Capacitance Figure 8. Typical Capacitance http://onsemi.com 3 MUR210 NOTE 3. - AMBIENT MOUNTING DATA Data shown for thermal resistance junction to ambient (RJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RJA IN STILL AIR Mounting Method 1 2 RJA 3 Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 50 Units C/W C/W C/W MOUNTING METHOD 1 L L EEEEEEEEEEEE EEEEEEEEEEEE Vector Pin Mounting MOUNTING METHOD 3 EEEEEEEEEEE EEEEEEEEEEE MOUNTING METHOD 2 L L EE EE EE EE EE EE EE L = 3/8 Board Ground Plane P.C. Board with 1-1/2 X 1-1/2 Copper Surface http://onsemi.com 4 MUR210 PACKAGE DIMENSIONS AXIAL LEAD PLASTIC CASE 59-04 ISSUE M B K D NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D K MILLIMETERS MIN MAX 5.97 6.60 2.79 3.05 0.76 0.86 27.94 --INCHES MIN MAX 0.235 0.260 0.110 0.120 0.030 0.034 1.100 --- A K http://onsemi.com 5 MUR210 Notes http://onsemi.com 6 MUR210 Notes http://onsemi.com 7 MUR210 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MUR210/D |
Price & Availability of MUR210RL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |